cocos2dx 制作单机麻将(二)
打乱麻将顺序2
前面解说了怎样打乱初始给定的麻将牌堆, 另一种是打乱随意给定的麻将牌堆
//混乱扑克2
void RandAppointCardData(BYTE cbCardData[],BYTE cbMaxCount,BYTE OriginalData[]/*源牌堆数据*/)
{
//混乱扑克
BYTE cbRandCount=0,cbPosition=0;
do
{
cbPosition=rand()%(cbMaxCount-cbRandCount);
cbCardData[cbRandCount++]=OriginalData[cbPosition];
OriginalData[cbPosition]=OriginalData[cbMaxCount-cbRandCount];
} while (cbRandCount
return;
}
以下是完整控制台代码
//
// main.cpp
// MajiangLogicTest
//
// Created by TinyUlt on 14-8-16.
// Copyright (c) 2014年 TinyUlt. All rights reserved.
//#include
using namespace std;#define MAX_REPERTORY 144
typedef unsigned char BYTE;
typedef unsigned short WORD;
//数组维数
#ifndef CountArray
#define CountArray(Array) (sizeof(Array)/sizeof(Array[0]))
#endif
const BYTE m_cbCardDataArray[MAX_REPERTORY]=
{0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09, //万子0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09, //万子0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09, //万子0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09, //万子0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19, //同子0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19, //同子0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19, //同子0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19, //同子0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29, //索子0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29, //索子0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29, //索子0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29, //索子0x31,0x32,0x33,0x34, //风牌0x31,0x32,0x33,0x34, //风牌0x31,0x32,0x33,0x34, //风牌0x31,0x32,0x33,0x34, //风牌0x41,0x42,0x43, //箭牌0x41,0x42,0x43, //箭牌0x41,0x42,0x43, //箭牌0x41,0x42,0x43, //箭牌0x51,0x52,0x53,0x54,0x55,0x56,0x57,0x58, //花牌};
//混乱扑克
static void RandCardData(BYTE cbCardData[],BYTE cbMaxCount)
{//混乱准备BYTE cbCardDataTemp[CountArray(m_cbCardDataArray)];//为什么直接用MAX_REPERTORY? 由于这样无耦合memcpy(cbCardDataTemp,m_cbCardDataArray,sizeof(m_cbCardDataArray));//拷贝一份到暂时牌数组中//混乱扑克(关键的核心打乱代码)BYTE cbRandCount=0,cbPosition=0;do{cbPosition=rand()%(cbMaxCount-cbRandCount);cbCardData[cbRandCount++]=cbCardDataTemp[cbPosition];cbCardDataTemp[cbPosition]=cbCardDataTemp[cbMaxCount-cbRandCount];} while (cbRandCount
输出:
25 13 1 3 21 43 54 14 9 12 13 8 31 24 13 31 6 4 28 31 34 18 7 27 15 18 51 11 42 12 28 2 57 25 16 4 33 15 18 21 42 33 29 41 25 3 23 55 14 41 27 22 34 21 2 9 29 19 43 23 22 22 19 34 16 15 32 58 6 28 17 21 18 8 43 28 33 32 6 33 2 25 14 11 29 19 26 13 4 24 53 52 16 15 27 3 27 31 9 1 26 22 3 32 17 26 26 7 12 42 41 32 17 8 7 9 34 8 7 16 17 41 19 5 29 2 23 6 4 24 42 24 1 56 11 1 12 5 23 11 14 43 5 5
16 56 21 7 28 14 41 12 16 24 43 21 31 26 3 53 52 7 12 34 51 14 9 29 23 33 12 31 14 6 16 18 54 21 25 58 19 5 7 28 32 34 1 27 27 33 6 14 9 17 25 33 28 11 17 24 43 2 22 6 23 3 11 42 2 18 3 4 42 4 18 55 25 42 22 32 4 15 8 29 24 13 6 26 19 9 41 25 7 8 1 13 11 15 41 43 57 16 33 18 32 27 1 8 12 31 4 5 27 22 26 23 31 2 5 17 26 13 19 43 17 21 42 5 3 19 23 15 28 15 8 24 9 29 13 32 34 2 34 41 11 29 22 1
Program ended with exit code: 0
麻将逻辑3. 初始化手牌
麻将的逻辑前提是有数据的支持, 全部有良好的数据存储方式是非常有必要的.
麻将的牌记录一般採取比較通用的方法,即一个一维的数组, 长度是牌型的数量, 元素的值为牌的数量
比如
#define MAX_INDEX 42//最大索引
BYTE cbCardIndex[MAX_INDEX]
由于牌的类型共同拥有42种 1万-9万 , 1筒-9筒, 1索-9索, 东南西北中发白(7),春夏秋冬梅兰竹菊(8)
9+9+9+7+8 = 42.
假设每摸到一张 1万 仅仅要 cbCardIndex[0]++, 摸到 3万 cbCardIndex[2]++ , 摸到东风就cbCardIndex[0x31]++吗?
你会发现牌值是用16进制表示的(回想第一讲), 全部我们不能用cbCardIndex[牌值] 来表示该类型牌的数量
比方 我想得到手中1筒的数量 不能用cbCardIndex[0x11], 应该用cbCardIndex[9]. 全部我们应该要有个能够让牌型值和索引互相转换的函数
即 实现这种功能 cbCardIndex[func(9)] == cbCardIndex[0x11], 这样我们就能够用牌型值来取该类型牌的数量了
直接上代码了 不早了 该睡觉了
//
// main.cpp
// MajiangLogicTest
//
// Created by TinyUlt on 14-8-17.
// Copyright (c) 2014年 TinyUlt. All rights reserved.
//#include
using namespace std;#define MAX_REPERTORY 144
typedef unsigned char BYTE;
typedef unsigned short WORD;
//数组维数
#ifndef CountArray
#define CountArray(Array) (sizeof(Array)/sizeof(Array[0]))
#endif
//逻辑掩码#define MASK_COLOR 0xF0 //花色掩码
#define MASK_VALUE 0x0F //数值掩码
#define MAX_INDEX 42 //最大索引
#define MAX_COUNT 14 //最大数目const BYTE m_cbCardDataArray[MAX_REPERTORY]=
{0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09, //万子0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09, //万子0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09, //万子0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09, //万子0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19, //同子0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19, //同子0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19, //同子0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19, //同子0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29, //索子0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29, //索子0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29, //索子0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29, //索子0x31,0x32,0x33,0x34, //风牌0x31,0x32,0x33,0x34, //风牌0x31,0x32,0x33,0x34, //风牌0x31,0x32,0x33,0x34, //风牌0x41,0x42,0x43, //箭牌0x41,0x42,0x43, //箭牌0x41,0x42,0x43, //箭牌0x41,0x42,0x43, //箭牌0x51,0x52,0x53,0x54,0x55,0x56,0x57,0x58, //花牌};
//混乱扑克
static void RandCardData(BYTE cbCardData[],BYTE cbMaxCount)
{//混乱准备BYTE cbCardDataTemp[CountArray(m_cbCardDataArray)];//为什么直接用MAX_REPERTORY? 由于这样无耦合memcpy(cbCardDataTemp,m_cbCardDataArray,sizeof(m_cbCardDataArray));//拷贝一份到暂时牌数组中//混乱扑克(关键的核心打乱代码)BYTE cbRandCount=0,cbPosition=0;do{cbPosition=rand()%(cbMaxCount-cbRandCount);cbCardData[cbRandCount++]=cbCardDataTemp[cbPosition];cbCardDataTemp[cbPosition]=cbCardDataTemp[cbMaxCount-cbRandCount];} while (cbRandCount牌值)
BYTE SwitchToCardData(BYTE cbCardIndex)
{//assert(cbCardIndex<42);if(cbCardIndex<31) return ((cbCardIndex/9)<<4)|(cbCardIndex%9+1);if(cbCardIndex>=31&&cbCardIndex<=33) return(((cbCardIndex/7)<<4)+cbCardIndex%10 );if(cbCardIndex>33) return(cbCardIndex+0x2F);//assert(false);return 0;
}
//扑克转换(牌型->索引)
BYTE SwitchToCardIndex(BYTE cbCardData)
{// ASSERT(IsValidCard(cbCardData));if((cbCardData&MASK_COLOR)<=0x30)return (((cbCardData&MASK_COLOR)>>4)*9+(cbCardData&MASK_VALUE)-1);if((cbCardData&MASK_COLOR)==0x40)return (31+(cbCardData&MASK_VALUE)-1);if((cbCardData&MASK_COLOR)==0x50)return (34+(cbCardData&MASK_VALUE)-1);//ASSERT(false);return 0;
}int main(int argc, const char * argv[]) {// insert code here.../*第一种混乱发*///创建一个空牌堆BYTE _cardData1[MAX_REPERTORY];//把在该函数中创建并打乱牌堆,然后把指针传给_cardData;RandCardData(_cardData1, MAX_REPERTORY);//输出牌数据cout<<"混乱初始牌堆"<
输出:
混乱初始牌堆
0x25 0x13 0x1 0x3 0x21 0x43 0x54 0x14 0x9 0x12 0x13 0x8 0x31 0x24 0x13 0x31 0x6 0x4 0x28 0x31 0x34 0x18 0x7 0x27 0x15 0x18 0x51 0x11 0x42 0x12 0x28 0x2 0x57 0x25 0x16 0x4 0x33 0x15 0x18 0x21 0x42 0x33 0x29 0x41 0x25 0x3 0x23 0x55 0x14 0x41 0x27 0x22 0x34 0x21 0x2 0x9 0x29 0x19 0x43 0x23 0x22 0x22 0x19 0x34 0x16 0x15 0x32 0x58 0x6 0x28 0x17 0x21 0x18 0x8 0x43 0x28 0x33 0x32 0x6 0x33 0x2 0x25 0x14 0x11 0x29 0x19 0x26 0x13 0x4 0x24 0x53 0x52 0x16 0x15 0x27 0x3 0x27 0x31 0x9 0x1 0x26 0x22 0x3 0x32 0x17 0x26 0x26 0x7 0x12 0x42 0x41 0x32 0x17 0x8 0x7 0x9 0x34 0x8 0x7 0x16 0x17 0x41 0x19 0x5 0x29 0x2 0x23 0x6 0x4 0x24 0x42 0x24 0x1 0x56 0x11 0x1 0x12 0x5 0x23 0x11 0x14 0x43 0x5 0x5
混乱指定牌堆
0x16 0x56 0x21 0x7 0x28 0x14 0x41 0x12 0x16 0x24 0x43 0x21 0x31 0x26 0x3 0x53 0x52 0x7 0x12 0x34 0x51 0x14 0x9 0x29 0x23 0x33 0x12 0x31 0x14 0x6 0x16 0x18 0x54 0x21 0x25 0x58 0x19 0x5 0x7 0x28 0x32 0x34 0x1 0x27 0x27 0x33 0x6 0x14 0x9 0x17 0x25 0x33 0x28 0x11 0x17 0x24 0x43 0x2 0x22 0x6 0x23 0x3 0x11 0x42 0x2 0x18 0x3 0x4 0x42 0x4 0x18 0x55 0x25 0x42 0x22 0x32 0x4 0x15 0x8 0x29 0x24 0x13 0x6 0x26 0x19 0x9 0x41 0x25 0x7 0x8 0x1 0x13 0x11 0x15 0x41 0x43 0x57 0x16 0x33 0x18 0x32 0x27 0x1 0x8 0x12 0x31 0x4 0x5 0x27 0x22 0x26 0x23 0x31 0x2 0x5 0x17 0x26 0x13 0x19 0x43 0x17 0x21 0x42 0x5 0x3 0x19 0x23 0x15 0x28 0x15 0x8 0x24 0x9 0x29 0x13 0x32 0x34 0x2 0x34 0x41 0x11 0x29 0x22 0x1
输出牌堆中全部牌型相应的数量
0x1:0 0x2:0 0x3:0 0x4:0 0x5:0 0x6:0 0x7:1 0x8:0 0x9:0 0x11:0 0x12:1 0x13:0 0x14:1 0x15:0 0x16:2 0x17:0 0x18:0 0x19:0 0x21:2 0x22:0 0x23:0 0x24:1 0x25:0 0x26:1 0x27:0 0x28:1 0x29:0 0x31:1 0x32:0 0x33:0 0x34:0 0x41:1 0x42:0 0x43:1 0x51:0 0x52:0 0x53:0 0x54:0 0x55:0 0x56:1 0x57:0 0x58:0
Program ended with exit code: 0